Sunday, May 25, 2014

Where Do Wireless Surround Sound Loudspeaker Products Acquire Their Power

By Mike Heller


You will find a few choices offered designed for setting up rear home entertainment loudspeakers such as directly wiring the speakers to your Audio-video receiver and utilizing a cordless surround system to eradicate the speaker cord clutter. Following that, I am going to look at the power supplies which supply these kinds of wireless products with power plus make clear a few of the most significant prerequisites which these types of power supplies have to meet.

Both the transmitter and receiver which are part of the cordless kit need power and thus have to be plugged into an outlet. You will find several options that supply the cordless receiver with power. One particular of these options is to work with an exterior AC adapter or wallwart that connects to a mains outlet. Another choice would be to make use of a power source which is entirely incorporated into the wireless receiver.

Wireless receivers which have an external wallwart dont need to include a power source. So they can be made significantly smaller. The exterior ac adapter typically is pretty small too and often plugs directly into a mains wall socket. Another kind of AC adapter offers an IEC type power jack. This jack hooks up to a mains electric outlet by employing a cord. Those AC adapters are really similar to those used by laptops. Combining a separate ac adapter is quite useful from a companys perspective given that regardless what nation the system is marketed to, a country-specific wallwart may be bundled. On top of that, quite a few wallwarts are already approved for safety. This will help save a lot of money in comparison with being required to safety approve the receiver. Theyre also less expensive to swap in the event of malfunction as opposed to changing the whole cordless receiver. Cordless surround amplifiers that have built-in power source are simpler to put in because they directly plug into a mains wall socket. Then again, they are typically more bulky.

Next, I am going to discuss what prerequisites the power supply has to satisfy. Safety is key. Consequently, the power supply needs to abide by the safety requirements that relate to each region which the product is marketed in. You can find a number of safety regulations in various nations. But, these requirements are made with the safety of the user at heart. One factor covered in almost all regulations is how well the individual is protected from potential electrical shock. Additionally, the power supply should not get too hot during normal function and also possess ample protection in case of an overload. Power supplies that have passed safety screening generally bear a UL or CE logo. When the power source is built-in into the cordless receiver then the receiver has this logo.

The power source needs to provide ample power to the RF receiver as well as power amplifier section. The RF receiver component decodes the cordless sound signal. The power supply has to be dimensioned large enough in order to supply the music amplifier with enough current in order to drive a connected speaker at the specified RMS wattage level no less than 10 minutes. A bigger factor than the continuous current specification is the top current specification. Audio signals hardly ever possess a continuous power envelope. Rather, audio has a lot of peaks. Therefore the power supply has to be ready to maintain a pretty big top current during short time bursts. The sound performance of the wireless receiver also depends upon how clean the power is which is provided by the power source. A great deal of voltage noise and ripple may result in the music performance to diminish. As such voltage noise as well as ripple are some additional vital requirements. A handful of high-end audio equipment utilizes linear power supplies despite their weight plus size because of the good noise performance. Without a doubt nearly all of current consumer products employ switched-mode power sources due to their small size. Ordinarily the interior parts need several supply voltages. Normally you can find a few voltages offered by the power supply to supply the individual components. For safety considerations, power supplies in most cases also have numerous protection techniques. The most prevalent types of safeguards are overload / short-circuit protection and over-temperature protection.




About the Author:



Related Posts by Categories

0 comments: